Assembly of your new sidecar:
Fixing of wheel
This guide focuses on the installation of the axle and wheel. We find the rest of the assembly to be fairly intuitive, If you need help call us at 507-333-0643
Slide inboard side of axle into suspension bracket on sidecar. Install locking steel tab washer and nut on inside of suspension bracket (See Figures 1 & 2).
Tighten nut and bend locking steel tab to prevent nut from loosening.
Slide steel spacer onto axle (See Figures 3 & 4).
Insert second plastic spacer onto axle and into wheel hub (See Figure 1).
Install outer washer, castle nut and cotter-pin onto axle.
Note: The outer end of axle and castle nut are left-hand threaded.
Hand-tighten castle nut.
IMPORTANT: Before driving with your new sidecar, you must bend the tabs of the sheet metal keeper to prevent loss of the inner axle nut and insert the cotter key to prevent loss of the outer axle nut.